ford MII rack fittings

[tomslik]

i've got some for a trw rack and dey don feet....
anybody have a part # or 2 for fomoco rack fittings?

[wayne petty]

i don't know if this is what you want... but here are the numbers for the original  hoses.. some of the hoses have a bunch of other hoses with the same fittings but different shapes.. they can be listed.. but it may get huge.. some racks have adaptors for various fittings.. that don't always come with reman racks..

Mustang II power steering hoses..
Edelman part numbers... also used at autozone
74-76 all pressure

70680    shows 3/8 female sae to 3/8 female sae and is 50 inches long... and the only hose with those fittings on both ends..

return   70703   3/8 male inverted flair on a 90 degree tube bend  52 inch long

return   71206   is just bulk 3/8 return hose...

77-78   pressure

70680    same as above

71020   5/16 male Oring X 3/8" swivel O ring (type 1)  54" long...    

71008     same as above 50 " long

77-78 return

71224   24 inchs of bulk hose

79 mustang with a trw rack
pressure 71020

return 71155   3/8 swivel O ring type 1    29" long

the only other one with the same fitting is a 71007

you might also want to check out this thread
http://www.roddingroundtable.com/forums/viewtopic.php?t=9759

[enjenjo]

Weatherhead has adapter fittings to 3/8" JIC in there brass fitting catalog, which is excaping me at the moment. They have to be used with teflon Orings to seal right.

[Learpilot]

Weatherhead has adapter fittings to 3/8" JIC in there brass fitting catalog, which is excaping me at the moment. They have to be used with teflon Orings to seal right.

Speedway has fittings to put #6 AN Stainless Steel hoses on the rack.
The fittings part # 617-4820 for $19.99 or the hose kit part # 617-4835 for $119.99. The hose kit will work for a GM or Ford pump.
Web www.speedwaymotors.com