SBC oddity?

Started by moose, November 01, 2008, 05:50:26 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

moose

I was working on making  ahammer form for my firewall. I wanted to make sure I had plenty of clearence for the distributor. After I dropped it into the block I noticed it looked off. The block is level butthe Dizzy sits on an angle. Never noticed this before. Anyone know why it mounts like this???

enjenjo

Because, that's why. :shock:

The distributor is tipped to the center of the car, I figured to line up with the depression in the firewall for a six cylinder on a 55 Chevy.
Welcome to hell. Here's your accordion.

348tripower

I was just looking at the COE and I  noticed that too.  I think we are virgins to this. :D I can't remember when I was able to really look at one of these from the rear. :lol:
Don Colliau

Learpilot

Quote from: "348tripower"I was just looking at the COE and I  noticed that too.  I think we are virgins to this. :D I can't remember when I was able to really look at one of these from the rear. :lol:

Too clear the cam which is in the center of the SBC

unklian

Must be more noticeable with the big HEI cap.