Its lunch time here..

[Dave]

So im playing a bit.. I ordered my seat cover and interior panels from ezboy interiors this morning. I ve been emailing jerry there to make sure we had the seat year and sizes and stuff all correct so i called him today. The cover and the panel material all came to a little over 850 bucks and its gonna be about 30-35 for shipping. I got the classis vertical pattern and all in bright red :!: Jerry asked if i needed anything else and i told him that was enuff on the credit card for today and he chuckled. I then told him id get the batting i needed to smooth out the details in the mini van seat foam and he said dont worry he would throw a roll in the box with the other stuff when he shipped it Very cool.. So looks like about 2 weeks till he ships. Thats ok as im back working on the exhaust and I screwed that up last night so i gotta re think my tail pipe plan this evening . Hopefully it will go better tonite   Ive got to finish the exhaust do the interior and decide if im gonna order a top or make one..
I doubt ill be gettin much done this weekend with the grand rapids trip saturday but i do have sunday all day to work.. Next i need to call the bike shop.. Im still waiting on replacement parts and ive about run out of patience. Time to stop being a nice guy and go to prick mode..
Dave

[rumrumm]

I will be looking forward to photos, Dave.

[EMSjunkie]

get back to work ya slacker :!:  :!:    

Vance

[Dave]

get back to work ya slacker :!:  :!:    

Vance

I was back workin way fore you decided to mess with me..    man I just came in from the garage and made a cocktail :!: I needed one .. Even though i pretty much except for around the M/C on this car patterned the exhaust like the coupe I forgot bout the * lectric fuel pump  :oops:  Well I relocated it higher on the frame (its a round inline type and cheap from ebay) so it was farther away from the exhaust and im gonna make a heat shield also..  The exhaust is in and has been but i never made the tail pipes.. I gotta make another change and im gonna cut the stainless tubing on the band saw at work tomorrow so's i can finish tomorrow night or sunday. Then ill have to run it down to the neighbor and his nephew will tig it all up for me pretty cheap.. At least i finally got a plan that works..  It wasnt a big deal and i shoulda started in a different direction last night but now i feel like Bill and his truck        Just kidding.. I really wish id have done all this sooner cause i still have to pull the manifolds and smooth em some more then coat em and polish the stainless pipes and the interior is comming in 2 weeks and so is spring and and and ..
Dave  

[UGLY OLDS]

With the body color you're using the "ray-ed" interior should work well....

Top ??  I thought that went with the fenders & boards  :?:  :?  :?

 Oh yea...Photos...We need photos.......

Bob....

[Dave]

With the body color you're using the "ray-ed" interior should work well....

Top ??  I thought that went with the fenders & boards  :?:  :?  :?

 Oh yea...Photos...We need photos.......

Bob....

Hey lighten up on the photos dude.. I haven got the interior stuff and it will prolly be february till i get it done then ill get some * pics for ya.. Actually im gonna document the interior real well cause i have the article from street rodder where they used the ezboy stuff and did a 32 roadster but they made a panel for behind the seat that looks good but they lost leg room.. Mine will be cut out so the seat can slide back into the rear panel and id bet i can gain 4 to 6 inches of leg room.. I dont like being cramped in a car (prolly never shoulda sold the 34).. 32 fords dont have a lot of leg room but the roadster set up right has a ton more than a 3 winder and a 5 winder has even less. So I have a plan... Also I really like a top when it rains .. A t bucket is a 4 wheel motorcycle but a 32 roadster can be made a nice foul weather car so im gonna try and make it so i can have a top for crummy weather (mostly while on trips) and no top to be cool(ya im cool anyway but this will help)
Dave