head torque sequence

[Inprimer]

Had to replace my kid's left head on his F1, actually thought the block was cracked but eventually narrowed it down to #3 cyl, crack in the  combustion chamber. tore down and cleaned rt head new gaskets etc, now I had a chart how to tighten in sequence and its a pain in the a**. so I grabbed a sharpie , mettalic silver and installed all the bolts hand tight, then I numbered each bolt on its head with the correct tightning sequence, so I made it from #1 to #24 without repeatedly looking at the torque chart, not a brilliant piece of info but it sure made it a lot easier, BTW the heads were torqued to 65#  does someone know its its correct? thanks

[Charlie Chops 1940]

Google Vanpeltsales.com....the second hit takes you to a flathead page with the info.

Google is your friend.

Charlie

[EMSjunkie]

Hey Serg, glad to see you made it alright.
guess the kiddo got ya back on line

Thanks again for stopping here and "donating" to the C-cab cause.


Vance