1950 Ford F-3 P/U

[EMSjunkie]

A buddy of mine recently acquired a 1950 Ford F3 p/u and was asking me questions about parts availability. the truck is fairly rust free, pretty straight, and pretty complete. does anybody know of a source for parts like window glass, interior stuff, etc :?:

Thanks

Vance

[phat rat]

same as an F-1

[Charlie Chops 1940]

Any glass shop can do the glass. It's all flat. If you have a really old time glass shop around there they might even have stock patterns. Getting to be less of those all the time but ya never know.

Charlie

[Fift4fe]

Go to www.ford-trucks.com
or
www.MidwestEarlyFord.com

Good luck

[Ed ke6bnl]

same as an F-1

wheel well openings are larger, beds are different, running boards, stronger better frame,  the obvious different rear end and length of truck.  I think the front ends are the same except the spindles.

I found the glass was cheap enough to order from catalogs, I did have the side windows cut for wind wings widow removal. the rest I got mailed to me. good luck Ed

[EMSjunkie]

Thanks Fellers, I'll pass the info along

Vance

[midnight sun]

Also might try:

www.bonusbuilt.com/forum/index.php