transmission swap 700R4 in place for 4L60e

[bilodeau65]

Need to find wiring diagrams for 1993 chey van with 4L60e. Also need to find wiring diagram 1985 chey truck with 700r4.  Had to swap trans for mobility inpared friend and don't want to burn trans up. ( no longer have truck) after all they are on a fix income. Any help and or suggestions would be greatly appreciated.
                                         JOHN

[Crosley.In.AZ]

Need to find wiring diagrams for 1993 chey van with 4L60e. Also need to find wiring diagram 1985 chey truck with 700r4.  Had to swap trans for mobility inpared friend and don't want to burn trans up. ( no longer have truck) after all they are on a fix income. Any help and or suggestions would be greatly appreciated.
                                         JOHN

the PCM will be looking for data from the 4L60E trans.... will set  1 or more DTC s.

[1FATGMC]

John if you can get the computer to live with the 700R4 one thing you have to take care of is properly hooking up the TV cable on the 700R4.  If not it just isn't going to work or live.

The only elect. to the 700 is for the lockup converter.  There are ways to handle that.  I use the TCI kit ($75 from summit), but you have other options as well.

I have info on my site here:

http://purplesagetradingpost.com/sumner/techinfo/techinfo.html

c ya,

Sum

[bilodeau65]

Thank you kind Sirs.
Sat. I'll replacing the T.V. cable, and checking for correct geom.
   A friend told me of an old style trans. shop in Dension Tx. . So check with him, his recom. was find a 4l60e. mean while hook the lock-up to a toggle switch.
 Again thanks  Now to find the impossible a good use 4l60e for a real reasonable price.

[Crosley.In.AZ]

Thank you kind Sirs.
Sat. I'll replacing the T.V. cable, and checking for correct geom.
   A friend told me of an old style trans. shop in Dension Tx. . So check with him, his recom. was find a 4l60e. mean while hook the lock-up to a toggle switch.
 Again thanks  Now to find the impossible a good use 4l60e for a real reasonable price.

and you need a 93 or 94 4L60E...... 95 & 96 have a different torque converter  lock up strategy.

1997 year GM changed the ohm rating on 1 solenoid..

1998 Gm started the 3 piece case use on full sized trucks (bell housing unbolts)...

I'd suggest a proper  rebuild of the OEM  unit for the truck.