Bending a forged Steering Arm

Started by Turbo26T, April 27, 2004, 08:55:15 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Turbo26T

April 27, 2004, 08:55:15 PM
Anybody ever have to bend a steering box arm ? I'm using a Vega steering box on my Track-T and I need to heat & bend the steering box arm out about an inch or so  to get my steering linkage parallel. The stock Vega arm has about 2" offset (6" ctr. to ctr.)and I need about 3"offset..It's a stock forged Vega arm and I have an extra to practice on ...I  I know this can be dangerous and is ill-advised to do so , but I've tried all my sources to find the correct offset without any results.. any thoughts , SWAG's , past experiences , etc
Hotrodding is a chronic sickness,eased only by exposure to the smell of hot oil,burnt racegas,loud exhausts and followed by periods of rest on a creeper underneath  some form of engine powered vehicle.

unklian

#1
April 27, 2004, 10:36:38 PM
Heat,bend,allow to cool in still air.

No problem.
Print
Go Up Pages1
User actions