Nova Rotors

Started by enjenjo, February 05, 2007, 09:43:45 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

enjenjo

I need some Nove rotors with a 5 by 5" bolt pattern. I found some set up for racing, but they have 5/8" studs. Anyone know if the studs are pressed in, or screwed in? If the shank isn't too big, I might be able to replace them with 1/2" studs.
Welcome to hell. Here's your accordion.

tomslik

i've got a new sardeson catalog and it appears that the studs are press in with a .685 knurl diameter.
that any help?
The last thing I want to do is hurt you. But it\'s still on my list

enjenjo

That helps, I can get 1/2" studs with that knurl. Thanks.
Welcome to hell. Here's your accordion.