How to best install my new Taylor universal wire ends

Started by Ed ke6bnl, June 23, 2006, 04:26:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ed ke6bnl

How to best install my new Taylor Spiro-pr universal wire ends??  I have a crimping tool for spark plug wires. I have the 8mm wires with both hei and point type. My idea is to get the wire length plus enough to strip off about 3/4 in of the insulation, do I then just tuck the inner wire under the insulation to be in contact with the metal clip and crimp. Put silicone grease on first so it will allow the wire to slip on to the boot and back into the boot when complete. Thanks in advance for the advice E dke6bnl
1948 F3, parts
1950 F1 SteetRod,
1949 F1 V8 flathead stocker
1948 F6 V8 SBC,
1953 Chevy 3100 AD pu future project& 85 s10 longbed for chassis
1972 Chopped El Camino daily driver
1968 Mustang Coupe
1998.5 Dodge 4x4 cummins 4door, 35"bfg,

enjenjo

I find it easier to put the boot on first, then strip it back for the terminal. Then I fold the core back over the insulation, and  crimp the terminal on. I have a good spark plug wire crimper, and it is well worth it to get one. I also put some silicone grease inside the boot before I install the wire.
Welcome to hell. Here's your accordion.

Ed ke6bnl

Quote from: "enjenjo"I find it easier to put the boot on first, then strip it back for the terminal. Then I fold the core back over the insulation, and  crimp the terminal on. I have a good spark plug wire crimper, and it is well worth it to get one. I also put some silicone grease inside the boot before I install the wire.

I did pretty much as you said and came out with a real clean crimp thank for the advice worked great now only 7 more to go. thanks E d
1948 F3, parts
1950 F1 SteetRod,
1949 F1 V8 flathead stocker
1948 F6 V8 SBC,
1953 Chevy 3100 AD pu future project& 85 s10 longbed for chassis
1972 Chopped El Camino daily driver
1968 Mustang Coupe
1998.5 Dodge 4x4 cummins 4door, 35"bfg,