Can you change the park position on a wiper motor?

Started by 48builder, December 17, 2005, 08:35:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

48builder

I had to move the location of my wiper motor to allow my A/C unit to sit where I want it. I admit I didn't do well on those aptitude tests where they show you a bunch of gearss connected together, and ask if the first one turns clockwise, what direction does the last one turn. It would make my life easier if I could just change where the motor stops. Can this be done?


Thanks

Walt
'48 Chevy Custom sedan in progress-Z28 LT1 drivetrain, chopped, shortened, too many other body mods to list
'39 Chevy driver

enjenjo

Welcome to hell. Here's your accordion.

WZ JUNK

Quote from: "48builder"I had to move the location of my wiper motor to allow my A/C unit to sit where I want it. I admit I didn't do well on those aptitude tests where they show you a bunch of gearss connected together, and ask if the first one turns clockwise, what direction does the last one turn. It would make my life easier if I could just change where the motor stops. Can this be done?


Thanks

Walt

Changing the clock position of the output arm might have the same effect.
WZ JUNK
Chopped 48 Chevy Truck
Former Crew chief #974 1953 Studebaker   
Past Bonneville record holder B/BGCC 249.9 MPH

48builder

Quote from: "enjenjo"What motor are you using?

If I flip the arm 180 degrees, it gets me closer to where I need to be, but not perfect. I can mount it differently, I just hate to redo what I have already done two times.
'48 Chevy Custom sedan in progress-Z28 LT1 drivetrain, chopped, shortened, too many other body mods to list
'39 Chevy driver

enjenjo

The reason I asked, some of the motor kits can be mounted two ways, to the left or to the right. Newport engineering for one, also the one that Macs sells.
Welcome to hell. Here's your accordion.