Esab Plasma cutter powerpoint 650

Started by MrMopar64, August 07, 2005, 01:25:38 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

MrMopar64

Any of you guys in So. Cal. interested in a used plasma cutter...... Seller claims it was only used 4 times and looks like new
This unit sells new for about 1800.......my buddy at AirGas says about 2200 from them........ I was dealing with the guy he was asking 1200 but has agreed to take 800.... but now after thinking about it I really don't need one that big and mine will sever 1/2" and run on 110 or 220 so I'm going to pass on it but thought someone may be interested after all I did all the chiseling  :wink:  :wink:
So let me know
MM64  8)
Here are the spec's
DESCRIPTION
Esab Powercut 650 Plasmarc Cutting Package
Manually cuts 5/8 inch and severs 3/4 inch - powerful cutting performance
Economical price - tremendous cutting value for the money
Compact portable design - goes to the job, easily moved about
Delivers big machine cutting power in a rugged, lightweight package.
Arrives ready to cut, with torch connected and front-end parts in place for the ultimate in operator convenience.
High frequency starting - starts through paint
Adjustable output - tailor the current to the material being cut
Compact, simple torch - easy access, little maintenance
New quick - connect torch switch plug
New durable torch cable prevents snagging on fixtures and materials
Patented XT nozzles - extended shape gives good visibility as well as good consumable life
Drag or standoff cutting - easy operation with little or no training
Template following feature - easily duplicates curves or straight lines
Tolerates poor power lines

FEATURES
The PowerCutâ„¢ 650 comes out of the box ready to go! The torch is attached with parts in place, primary cord is attached and the filter/regulator is installed. Just hook up the air, plug it in and cut.

The PowerCutâ„¢ 650 comes complete with everything you need:
Console
25ft. PT-31XLPC torch
Torch spare parts kit
Air filter/regulator
Input power cord with plug
25ft. work cable with clamp
System arrives fully assembled and ready to cut

SPECIFICATIONS

Cuts 5/8" - Severs 3/4"
Output:
40% duty cycle 40A/120V
60% duty cycle 30A/120V
100% duty cycle 22A/120V
Output Current Range 10-to-40 Amperes
Open Circuit Voltage 290VDC Nominal
Input: 208/230VAC 1-phase 50/60 Hz, 35/32 amps
Power Factor @ 40A Output 76% (1-phase)
Efficiency @ 40A Output 85% (Typical)
Air Requirements 250 cfh at 80 psig
Dimensions:
Length w/o handles 16.00" (406mm)
Length w/ handles 25.70"(653mm)
Height 16.38" (416mm)
Width w/o optional torch wrap 12.50" (318mm)
Width w/ optional torch wrap 15.50" (394mm)
Weight (less torch & work cable) 53lbs. (24kg)
www.rgkustoms.com
www.rg-kustoms.com
Racing.... Because Baseball, Football, & Basketball
Only Require One Ball..... Gotta Race
  :lol: