T-5 to a Ford 300 I6

Started by STEVE1103, June 28, 2005, 03:16:15 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

STEVE1103

June 28, 2005, 03:16:15 PM
Was told you can bolt on a T-5 to a Ford 300, it's from a F100, and has a 3 speed. If this is so, what clutch do you use, and can you use a T-5 from an S10. Thanks :roll:

Phat

#1
June 28, 2005, 03:17:57 PM
Get one from a mustang and it will be a bolt in.
Old racers go in deep and come out hard

Phil1934

#2
June 28, 2005, 04:15:18 PM
If you need the S10 trans to move the shifter forward, then just grab the 3 speed with OD out of an '80's Ford PU.  Shifter comes out of the top cover.  '85 was about the last year for a good looking shifter, later ones got clunky, but they are cheap.

Pope Downunder

#3
June 29, 2005, 07:00:10 AM
Quote from: "Phil1934"If you need the S10 trans to move the shifter forward, then just grab the 3 speed with OD out of an '80's Ford PU.  Shifter comes out of the top cover.  '85 was about the last year for a good looking shifter, later ones got clunky, but they are cheap.

I wouldn't use the S10 trans; however, you can fit the S10 tailhousing to your Mustang T5.

flt-blk

#4
June 29, 2005, 04:48:34 PM
MMMMmmmmmmmmm  Tremec



I am about ready to buy a TKO500 if anyone has an extra laying around.
Philosophy of hot rods
The welder is the Yin and the Grinder is the Yang
Print
Go Up Pages1
User actions