Best Ford caliper for 11" rotors on Mus II IFS

[2rods]

I am using a CE bracket with 82 Mustang calipers on the Mustang II front end but may have a slight problem with these brackets. The bleeder screw on the caliper is lower than the hose and it is pointing down slightly. Am I going to have trouble bleeding?

[enjenjo]

Yes. Can you flip them side to side, and get the bleeder higher?

[2rods]

That's what I thought. Tried flipping but won't work. I bet it has something to do with the fact the spindles are dropped?
Anyone else had this problem?

[enjenjo]

Ok then, you can bleed them by removing them from the rotor, turning the bleeder up, and putting a block of wood between the pads to keep the piston from popping out.

[2rods]

That's exactly what I was going to do but it is a pain. I don't think the bracket is designed properly or is this common for dropped spindles?