tranny shifter for work

Started by Crosley.In.AZ, January 15, 2005, 12:37:16 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Crosley.In.AZ

January 15, 2005, 12:37:16 AM
I thought I would show y'all what I use for a tranny shifter at work lately...

One of the owners of Hughes Performance gave me this new Miller tap handle.  I bent up the 1/2 inch round tube with a tool I bought from Jerry over at the HAMB

The wire loom running over the tranny is from the control box... this is a 4L60E tranny on our dyno.
Tony

 Plutophobia (Fear of money)

Bruce Dorsi

#1
January 15, 2005, 12:43:43 AM
Tony, when you get some free time, would you please post some pics of the trans dyno?

I've never seen one, and I'm curious!

Thanks!
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

If being smart means knowing what I am dumb at,  I must be a genius!

Scrap Fe

#2
January 15, 2005, 10:35:50 AM
Quote from: "Crosley"I thought I would show y'all what I use for a tranny shifter at work lately...

One of the owners of Hughes Performance gave me this new Miller tap handle.  I bent up the 1/2 inch round tube with a tool I bought from Jerry over at the HAMB

The wire loom running over the tranny is from the control box... this is a 4L60E tranny on our dyno.

So what kind of shifter do you have on the beer keg now, a B&M?
Print
Go Up Pages1
User actions