LT1 Schematic

Started by Pep, October 24, 2004, 08:53:41 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Pep

There's a rodder over here that's acquired an LT1, 1994-1996  front cut and is trying to work out the wiring. The loom has been cut at the firewall and he doesn't know  which color wire goes to what. He said that Painless has a code of 60502 for the EFI section but their web site doesn't show the color/purpose of each wire. Anyone know where I can get a soft copy including the general wiring schematic. I believe the cars are Camaro/ Firebird, Corvette, Roadmaster, Impala/Caprice 5.7L. Thanks in advance for any help.
See Ya
Pep

enjenjo

I might be able to copy the wire color pages from a painless manual, and send it too you PEP
Welcome to hell. Here's your accordion.

Pep

Quote from: "enjenjo"I might be able to copy the wire color pages from a painless manual, and send it too you PEP

Much appreciated Frank....I'll send a PM with my email addy... but you might already have it anyway.
See Ya
Pep

WZ JUNK

Quote from: "Pep"There's a rodder over here that's acquired an LT1, 1994-1996  front cut and is trying to work out the wiring. The loom has been cut at the firewall and he doesn't know  which color wire goes to what. He said that Painless has a code of 60502 for the EFI section but their web site doesn't show the color/purpose of each wire. Anyone know where I can get a soft copy including the general wiring schematic. I believe the cars are Camaro/ Firebird, Corvette, Roadmaster, Impala/Caprice 5.7L. Thanks in advance for any help.

I have a complete harness still attached to an engine and computer on the floor of my shop.  I will be replacing the factory harness with a Haywire unit.  If I can help you locate a wire or connection, just let me know.
WZ JUNK
Chopped 48 Chevy Truck
Former Crew chief #974 1953 Studebaker   
Past Bonneville record holder B/BGCC 249.9 MPH

Pep

Quote from: "WZ JUNK"
Quote from: "Pep"There's a rodder over here that's acquired an LT1, 1994-1996  front cut and is trying to work out the wiring. The loom has been cut at the firewall and he doesn't know  which color wire goes to what. He said that Painless has a code of 60502 for the EFI section but their web site doesn't show the color/purpose of each wire. Anyone know where I can get a soft copy including the general wiring schematic. I believe the cars are Camaro/ Firebird, Corvette, Roadmaster, Impala/Caprice 5.7L. Thanks in advance for any help.

I have a complete harness still attached to an engine and computer on the floor of my shop.  I will be replacing the factory harness with a Haywire unit.  If I can help you locate a wire or connection, just let me know.



Thanks for that, but I don't know what he exactly needs to know. He asked for the complete schematic so I assume he needs a lot of info.
See Ya
Pep

Pep

just bumping back up to the top
See Ya
Pep

enjenjo

I haven't forgotten, just haven't had a chance to get the pages scanned yet.
Welcome to hell. Here's your accordion.

Pep

Quote from: "enjenjo"I haven't forgotten, just haven't had a chance to get the pages scanned yet.

Thanks Frank...I will await
See Ya
Pep