does anybody know who sells the thing

Started by tomslik, January 20, 2022, 03:11:36 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tomslik

you put in a drill to clean up threads?
i think i'm gonna want one as i need to trim off some of me 3" wheel studs...no idea what you call it, but i've seen them advertised
The last thing I want to do is hurt you. But it\'s still on my list


tomslik

you ever used one? just wondering if they are as good as it sounds..
The last thing I want to do is hurt you. But it\'s still on my list

123pugsy

Nope, but if it's made of HSS, I didn't check, I'm sure it would be fine.
But you just never know when buying something "as seen on TV"

chimp koose

If you use one make sure to turn it slow and use light pressure . And some cutting oil . It would be easy to crush the top of the thread down with too much pressure/dull tool .

tomslik

so, i bought one of these Titan 51950 EXO BURR External Deburrer and Chamfering Tool, For 5/16 to 7/8-Inch (8-22mm) Threads. works great.
i was cutting off some wheel studs/bolts that were on some aftermarket axles and wanted to clean up the ends..
The last thing I want to do is hurt you. But it\'s still on my list

chimp koose

Thanks for the feedback . One never knows how some of this stuff will work until you try it .