9" Ford rear end bearing issue

[34ford]

Update. Wayne, the seals are the 13700 that are in the ends of the axle tubes. Seals looked good and there was no fluid leaked by them. The bearings are RW207-CC. Took the axles to the brake and clutch shop here in town that's been around for 40+years and had new SK RW207-CCRA. bearings and retainers installed, Mike said they were the best. Did put in new seals also. The old bearings were a little loose in the races. Looks to be a cheap bearing from the pictures on the internet and the way the numbers were printed on the outside of the race. Should be good to go for many more miles.

[kb426]

Sounds like a problem solved.