Chassis Engineering

Started by 40 Chev Coupe, October 01, 2004, 08:30:50 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

40 Chev Coupe

Does anyone out there have an e-mail address for Chassis Engineering?
Looking at bolt in croossmember for a 40 Chevrolet, any input from anyone on other makes (if any) are being made.

58 Yeoman

1500 Avenue R
Riviera Beach, FL. 33404

800-327-9402
info and tech, 561-863-2188
I survived the Hyfrecator 2000.

"Life is what happens when you're making other plans."
1967 Corvair 500 2dr Hardtop
1967 Corvair 500 4dr Hardtop
Phil

tom36

Quote from: "40 Chev Coupe"Does anyone out there have an e-mail address for Chassis Engineering?
Looking at bolt in croossmember for a 40 Chevrolet, any input from anyone on other makes (if any) are being made.

Maybe it's this Chassis Engineering that your looking for-
http://www.chassisengineeringinc.com/  Tom..

alchevy

I have a Fatman crossmember on my '40 Chevy and I'm very pleased with it. Go to my website and click on the build-up page for my '40 Chevy and at the end of it, there's a list of parts I used on it.
AL
A street rod is a vehicle made before 1949 that is modified with modern stuff: bigger motors; newer trans; updated suspension, front & rear; a/c.
Following is a street rod plus definition: No known definition because it changes.

www.astreetrodder.com

47 ragtop

I have a CE bolton kit on my 47 chevy convertible. The adjustable spring hats are great, I recommend starting with the adjustment in the middle. As with all CE products they work  and fit perfectly.

Skip

Quote from: "58 Yeoman"1500 Avenue R
Riviera Beach, FL. 33404

800-327-9402
info and tech, 561-863-2188

methinks this is the wrong one.  These guys build late model chassis stuff.
Skip

Early Hemi SME
Hot Rod Wiring Consulting