TOPIC: Cooling the tri five generation

Started by BFS57, July 24, 2016, 07:57:27 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bruce Dorsi

Quote from: "BFS57"Hello;
I have a 3000 CFM on the rear side of the radiator set to 170 and a pair of 10" fans on the front of the condenser that come alive when the ac is on. (Also have a shroud)
Bruce


It is possible that the two fans, and shroud, in front of the condenser may be restricting the airflow through the radiator when they are not turning.

Fan size alone, does not determine cfm.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

If being smart means knowing what I am dumb at,  I must be a genius!

BFS57

Quote from: "Bruce Dorsi"
Quote from: "BFS57"Hello;
I have a 3000 CFM on the rear side of the radiator set to 170 and a pair of 10" fans on the front of the condenser that come alive when the ac is on. (Also have a shroud)
Bruce


It is possible that the two fans, and shroud, in front of the condenser may be restricting the airflow through the radiator when they are not turning.

Fan size alone, does not determine cfm.

I'm really not sure but how would someone find out?
Only shroud I have is on the back side of the radiator. But the radiator fan is just flat on the backside of the radiator.
The CFM numbers came from the seller of the fan, again how would one find out just exactly the puller is truly putting out??

Bruce