Hey Crosley

Started by Okiedokie, July 31, 2016, 12:41:36 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Okiedokie

Any problem moving a vehicle with a fresh [dry] AOD trans? The drive shaft is connected, should I just fill to full mark on the dipstick. I did add a quart to the converter before installing. Just moving it onto trailer then push on a rack at the muffler shop then probably two more times off and on the trailer. Just not ready to fire motor yet.

Crosley.In.AZ

moving around at slow speed as pushing the vehicle  is fine.

You will get into trouble via flat towing with drive shaft connected.  Internal parts spin with no lubrication
Tony

 Plutophobia (Fear of money)

Okiedokie

Thanks Tony. Just pushing, figured it would be ok, but wanted your input.