I need a pinion flange for a 9 inch Lincoln Center Section

348tripower · October 07, 2004, 06:47:46 AM

Anybody got one of these they don't need?
Thanks,
Don

Fat Cat · October 07, 2004, 08:52:55 AM

Quote from: "348tripower"Anybodygot one of these they don't need?
Thanks,
Don

Are you just needing the half that attaches to the carrier? If so do you know how tall it is?

I might have one I know I am not going to use

348tripower · October 07, 2004, 09:33:15 AM

I need the flange that the drive shaft flange mates up with. Goes on the pinion like the driveshaft yoke. Length isn't a problem just needs to be 28 spline 1.218 I.D. and a ground od of 1.812
Don

Quote from: "Fat Cat"
Quote from: "348tripower"Anybodygot one of these they don't need?
Thanks,
Don

Are you just needing the half that attaches to the carrier? If so do you know how tall it is?

I might have one I know I am not going to use

Kctom · October 07, 2004, 09:42:17 PM

Quote from: "348tripower"Anybody got one of these they don't need?
Thanks,
Don

Don, are you wanting the round flange with the holes in it ?

348tripower · October 08, 2004, 05:20:55 AM

Yes,
I need the round one from a linclon versailles.

Quote from: "Kctom1"
Quote from: "348tripower"Anybody got one of these they don't need?
Thanks,
Don
Don, are you wanting the round flange with the holes in it ?

Fat Cat · October 08, 2004, 06:54:07 AM

Quote from: "348tripower"Anybody got one of these they don't need?
Thanks,
Don

I will look at the one I have this weekend and get back to you

348tripower · October 08, 2004, 08:39:34 AM

Thanks Frank.

Quote from: "Fat Cat"
Quote from: "348tripower"Anybody got one of these they don't need?
Thanks,
Don

I will look at the one I have this weekend and get back to you

Kctom · October 08, 2004, 06:04:23 PM

Quote from: "348tripower"Yes,
I need the round one from a linclon versailles.

Quote from: "Kctom1"
Quote from: "348tripower"Anybody got one of these they don't need?
Thanks,
Don
Don, are you wanting the round flange with the holes in it ?

Don email me or pm. Have one in really good shape. I'll send it out to you as soon as I hear from you. glad to be of help. won't cost you a thing.
Tom

348tripower · October 09, 2004, 05:40:17 AM

Tom,
Check your PM and thank you very much.
Don

Quote from: "Kctom1"
Quote from: "348tripower"Yes,
I need the round one from a linclon versailles.

Quote from: "Kctom1"
Quote from: "348tripower"Anybody got one of these they don't need?
Thanks,
Don
Don, are you wanting the round flange with the holes in it ?

Don email me or pm. Have one in really good shape. I'll send it out to you as soon as I hear from you. glad to be of help. won't cost you a thing.
Tom

Kctom · October 09, 2004, 06:55:30 PM

Quote from: "348tripower"Anybody got one of these they don't need?
Thanks,
Don

Don, cleaned it up and blasted it today. In the box ready to ship Mon.
TOM

Kctom · October 12, 2004, 09:57:20 AM

Quote from: "348tripower"Anybody got one of these they don't need?
Thanks,
Don

Don you should get it thur. shipped by UPS
TOM