Powerglide plumbing

[EMSjunkie]

Have a question regarding plumbing a Powerglide to the cooler in the radiator. which line goes where? does it matter? surley one is pressure, and one is return, but does it matter which one goes where at the radiator? and since I'm asking, will the tranny cooler on the bottom of a Walker Cobra series radiator be adequate, or would I be better off with an after-market cooler?  :
Thanks for the info


Vance

[Crosley.In.AZ]

does not matter what line is hooked to which port on the tranny or radiator.

 There should be no check valve in your tranny cooler system

The cooler in the rad should be fine if you are using a stock stall converter

[EMSjunkie]

THANKS CROS!!!!  I knew you would come thru for me. its a fresh 'glide and I don't want to screw it up.
Thanks again.



Vance