Connector disassemble method?

Started by Crosley.In.AZ, December 15, 2013, 12:27:30 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Crosley.In.AZ

See photos..  Wire pulled out of this connector. It is a weather pack type with little silicone seal on male end that plugs into this one.

I have tried to release the pin with various hand made tools pushed down into the slot openings and nothing releases the pin.  I tried in the slot opening, next to the pin, from the end where the wire is crimped on , nothing seems to release the pin from the housing

Perhaps a ''one time use'' connector?
Tony

 Plutophobia (Fear of money)

enjenjo

The pin removal tool works from the other end, looks like a screwdriver handle with a thin wall tube that  fits over the outside of the female pin. Here is the part number for one version  SPX Kent Moore J-38125-10A  You push the tube over the pin, and it all comes out this end.
Welcome to hell. Here's your accordion.

wayne petty

frank is right on how to release it..

it looks like  a 280 series.. but i could not see that exact shape.. but i could be wrong..


there are a few catalogs that should be in ever rodders computer...


this is 404 pages.. and covers a Significant amount of delphi connectors..but not all

http://www.powerandsignal.com/docs/DCS%20Global%20Catalog.pdf


i know there was some talk about the headlight connectors a year or two ago..

here is the headlight connectors section.. the group 59 series..

http://terminalsupplyco.com/Store/Default.aspx?CATDRILL=DEL020&PCAT=54228#Categories


here are the 56 series.. that are used on the headlight switches.. ignition switches..  various switches.

http://terminalsupplyco.com/Store/Default.aspx?CAT=DEL010&PCAT=54228#Categories

ford and chrysler terminals..

http://terminalsupplyco.com/Store/Default.aspx?CAT=T010070&PCAT=77370#Categories


just thought i would share the links..