Bending 6061-t6 aluminum sheet?

Started by purplepickup, February 18, 2013, 03:20:50 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

kb426

George, I was told that abs cement is acetone and abs shavings mixed together. I used it some and was satisfied with the results.
TEAM SMART

1800guy

I think I missed something regarding the ABS:  Do you use heat to bend it, or just treat it like sheet metal?
My project is 90% finished, with only 90% to go.

purplepickup

Quote from: "1800guy"Do you use heat to bend it, or just treat it like sheet metal?
Heat.  It has to be focused on the bend area only.  Most people use NiCr resistance wire (like in a toaster) and a transformer.  There's "how to" videos on youtube.  I just used a heat gun with pieces of wood to shield everything but the bend line (outside radius side).  I went slow and once it was limber enough to bend I had plenty of time to work the bend to exactly where it needed to be.
George