Trans tunnel room

Started by trackster, February 06, 2019, 03:40:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

trackster

February 06, 2019, 03:40:33 PM
Just wondering......Is much cutting on the floor in the trans tunnel area needed to put a 4L60E behind a Chevy 350 LT1 in a 1939 Chevy?   It looks like it might be close but haven't had time to measure yet.    Thanks.
I am CDO, kinda like OCD, but in alphabetical order, like it should be!

58 Yeoman

#1
February 06, 2019, 05:15:14 PM
I had a 41 Pontiac, and the front floor was pretty flat. I had to cut it out to clear the TH400. I don't know how how it compares to your tranny.
I survived the Hyfrecator 2000.

"Life is what happens when you're making other plans."
1967 Corvair 500 2dr Hardtop
1967 Corvair 500 4dr Hardtop
Phil

UGLY OLDS

#2
February 06, 2019, 08:44:57 PM
On my '40 Olds, we never modified the floor or firewall to install a gen 1 350/700R4 trans ...The trans tailshaft even fits inside the X-member ....Also has a long water pump...Stock bolt in floor trans panel still bolts in ...Close ..But it fits .....

Bob ... :wink:
1940 Oldsmobile- The "Ugly Olds"
1931 Ford sedan- Retirement project

***** First Member of Team Smart*****

trackster

#3
February 15, 2019, 04:11:45 PM
Thanks for the replies.  Been under the weather with a temp of 104 so not much happening here.
I am CDO, kinda like OCD, but in alphabetical order, like it should be!
Print
Go Up Pages1
User actions