Eastwood exhaust manifold paint clean up

[ragtag]

Guys,
     While touching up my exhaust manifold I got a few drops of the Eastwood exhaust manifold paint on my frame rail. The frame rail is painted with Omni single stage enamel.  Any suggestions on how to remove them without messing up the paint? Thanks.

[Mac]

Hopefully it hasn't been too long and the paint drips are still somewhat soft. If it's meant to be cured from exhaust heat it might still be more removeable, also.
I would start with carefully shaving as much of the drip off as you can.  Sometimes if it hasn't bonded that well you can pop off the whole drip. Then work at the remaining with solvent on a Q-tip. Start with alcohol or mineral spirits/paint thinner and if necessary go to a hotter solvent like acetone or lacquer thinner. Does the product say what to use for clean up?