Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - HemiDeuce

#1
I believe if it is registered as a 1936 you can bring it in.
Call Customs and tell them it's a glass car but registered as a real 36 and see what they say.
HemiDeuce.
#2
BFG makes a LT 215/85R16 in load range D that is 29.9" in Dia. and mounts on a 5.5 to 7"rim.  With a lower air pressure this tire  whould ride quite good I would think.  I'm going to try them myself. Not quite as wide as a 285/7015 and might look a bit better, only problem is you are going to need 16"rims.
HemiDeuce
#3
Rodder's Roundtable / Wagner brake hoses
February 19, 2007, 11:41:00 PM
The 4497 Hose has a 7/16"-24 fitting on the Left Side and a 7/16"-20 on the Right side and the overall length is 16 7/8" long.  I believe the Raybestos part Number is the same as the Wagner.
#4
Rodder's Roundtable / Wagner brake hoses
February 15, 2007, 11:25:48 PM
Try D.V. Aldous in Vancouver at 604-876-2226.
HemiDeuce.
#5
Rodder's Roundtable / Cruise control recommendations
December 28, 2006, 11:45:34 PM
Has anyone had any experience with  Ultra Cruise that is sold by United Speedometer?  I am thinking of one for my roadster and it doesn't have a GM column that a lot of units seem to have activation swithches for.
HemiDeuce
#6
Rodder's Roundtable / Tires ols school look
October 24, 2006, 11:43:42 PM
Your tires look very close to bias ply's. What is the brand of the tires?
Hemideuce.
#7
Did your ZZ4 block come with a long water pump?  Would switching to a short water pump give you enought room for a fan without moving the engine.
#8
Rodder's Roundtable / Hidden PCV?
April 25, 2005, 11:53:23 PM
Hi Skip I know you are a Hemi expert, and was wondering what you think of using a PVC Valve in the valley cover of a 354 Hemi and routing it to the base of the carb and using the stock Oil fill breather as the air inlet for the PVC system, without having a vent in the stock Hemi valve covers.