Messages

Wow, I can imagine the new heads you could desighn for a Hemi.

I want some......................

If the price is right, I'd go for it.

I use at a minimum 8ply light truck tyres, and have never had a problem

I've been spending the last couple of weeks building a slotcar track, I got the bug again after 35 years a couple of months ago.
Now I have collected roughly 40 cars and I can't seem to stay away from Ebay, still collecting.








Not quite finished yet, I need to rig up a pulley system to run to a boat winch so I can lift it up when I need the room to work on cars.

I am going to use it to connect a B&M lockup converter control box, and my exhaust is too close to the speedo outlet on the box, I need to turn it at 90deg to be able to fit the B&M drive controller, I have an electronic speedo so drive ratio is not important I can reprogram the speedo.

I need a 90deg speedo cable adapter to suit a Turbo 400, must have the same thread both ends.
I am led to believe that any Chev one will do,  they all have the same thread for the speedo cable.

Cheers
Andrew

The day has finnally arrived, do you remember the trip to your fair shores when I took with my friend Scooter to pick up a 48 panel truck with a 392 hemi in it?

Well we have been building him  a 33 Dodge sedan for it to go into, and  the hemi is now at home in his Dodge and finally on it's way to get rego today, I spent the weekend giving the sedan a coat of white primer so it was all the same color and boy does it look good.

Here's hoping to be cruising in it this weekend  

My neighbour has a 62 Impala with a 350 chev, it's not good enough for him so....................he went shopping for something with a few more horsepower.

We took the 350 out....



And put this in it's place.



This should do the job

Will an F1 panel truck fit in it?    

The shimmy you discribe is usually caused by an out of balance or buckled rim.

Ditto, I was with Frank on one of his visits, and John made myself and Scooter feel very welcome, we haven't been often enough to be on a first name basis with his lunch crew, but we still had a good time being shown all there is to see in John's little peice of America.

Thanks John

What about one in a bucket?

Got to love them Hemi's      

What, like this?

http://www.ebay.com.au/itm/MINI-Alternator-DENSO-STREET-ROD-RACE-1-WIRE-NEW-55Amp-/270615729782?pt=Motors_ATV_Parts_Accessories&hash=item3f01f45676

I have one of these on my hemi, fits really well  

I took the coupe for it's maiden voyage with the new Hemi, I thought where better to go than where i was headed when she let go, so off to Tumut I went.

All up about 450Klms round trip, the engine went great, ran cool and had good oil pressure all the way there and back, all I need to do now is sort out the new trans, T700 4 speed with that TV cable that needs to be set just right.

Andrew