Messages

met him years ago, nice guy, great writer, man was he tall

bled the master cyl. that did the trick

been there more than a few times, swap meet has large ballast type stone is hard to walk on, good show

thanks guys

one of my sons has a 2003 Ford F150 truck. He's been driving it with the brake light on. Now the pedal goes to the floor. checked the master cyl, it was empty, he filled it up and still no pedal. truck has 4 wheel disc & master cyl booster. looked the truck over, no leaks, nothing on the ground. Your thoughts please

thank you for the link, chimp

master cylinder, pedal, booster are from a kit from ECI

I'm done! taking out the master cyl & booster, going back to manual brakes. thanks  for all the advice

yes, no yes

yes, soft pedal, bled many times

I got another question guys.....have a 40 Ford sedan with a chevy 350/350 disc brakes, fron & rear.  master cyl under the floor 1" bore has 2 residual valves, 6 inch power booster with a vacuum canister.

problem: brake pedal goes to the floor, car stops but I don't like the feel. disc brakes are wilwood, master cyl setup from ECI

thanks for any advice

thank you this post, will come in handy

congrats, saw it at the Nats

good size swap meet, but hard walking on the large ballast

adjusted the brake pedal a few more times. figure the ratio is 6 to 1. working good now. thank you everybody, Larry