Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - propaniac

#1
Rodder's Roundtable / Propane questions , BBQ stuff
June 18, 2004, 08:29:14 PM
Crosley,

They make fire rings that you can buy that allready have the holes drilled in them and everything.  They are made out of steel, and have a 1/2" fpt so you can screw it onto a 1/2" nipple. (propane burns with a black sooty residue if you dont add a air/ venturi, you will also get a "rich" burning smell that is not pleasant.)  I use an orifice venturi off of a propane log set) You can get the orifice/venturi and the fire ring at BBQ's galore ( or AZ gas products.  Behind Lowes on Frank llyod Wright)  Its best to install the fire ring  with the holes down to keep them from rusting out.  Make sure you use the green coated pipe underground and tape the uncoated fittings to prevent corrosion.  To make it a real proffesional install use a fire place key valve so it wont get turned on accidentally.  Copper will work too because the flame dosent actually burn on the copper it burns a little off of it.  

Oh yeah and if you use the lava rocks in the fire pit test fire them before the wife gets settled in,  they sometimes explode from trapped gasses.


Good luck

John