Text Only | Text with Attachments

The Rodding Roundtable

Motorhead Message Central => Rodder's Roundtable => Topic started by: 348tripower on March 29, 2009, 06:43:04 AM

Title: Coe update
Post by: 348tripower on March 29, 2009, 06:43:04 AM
Here is a update picture. My buddy had a ribbed bumper. It was too narrow, so, we have a split bumber going on.  We are going to radius the inside ends.
(http://i178.photobucket.com/albums/w268/dcolliau/P3280086.jpg)
Title: Coe update
Post by: Danimal on March 29, 2009, 09:05:53 AM
I always heard that horizontal stripes made you look shorter!

Looking good, Don.
Title: Coe update
Post by: moose on March 29, 2009, 10:28:33 AM
lookin' good Don. Is it roadready yet? Gonna have it ready for Ypsi?

Tim
Title: Coe update
Post by: UGLY OLDS on March 29, 2009, 11:37:12 AM
Lookin' great  :!:  "Company name" on the door dosn't seem very fitting though.. :? ... :?:



Bob... :wink:
Title: Coe update
Post by: 58 Yeoman on March 29, 2009, 01:56:03 PM
Good place to mount the front license plate.
Title: Coe update
Post by: Fat Cat on March 29, 2009, 02:44:43 PM
Quote from: "58 Yeoman"Good place to mount the front license plate.

Michigan does not run front plates. They only require one plate in the rear.
Title: Coe update
Post by: Crosley.In.AZ on March 29, 2009, 04:04:07 PM
Quote from: "Fat Cat"
Quote from: "58 Yeoman"Good place to mount the front license plate.

Michigan does not run front plates. They only require one plate in the rear.

One of those plates that read correctly in a rear view mirror like:

Get out of my way!
Title: Coe update
Post by: 348tripower on March 29, 2009, 04:50:32 PM
Moose,
 I don't think I can be ready for Ypsi, too much to do yet. Fat Cat is right about not needing a front plate. I think it will be fine when the ends are finished off.
I am having shoulder problems again.  :(  So, it is going a lot slower now.  Went out yesterday while moving a trans. When this shoulder dislocates it puts me down for about a week. So much for surgery to fix it years ago. Just a lazy day today.
Anyhow, I need to fix one hinge on the windshield frame, clean and prime the inside of the cab, and prime the box parts. Wiring to follow. Whew, I'm beat just thinking about it :lol:
I did do a bit of repair to the dash today. I have some more pictures of the diamond plate in the bed I'll add later.
Don
Title: dodge window hing
Post by: oddjob on March 29, 2009, 07:47:41 PM
If your hinge is bad I think  its the same body as a half ton I have an extra Russ
Title: Re: dodge window hing
Post by: 348tripower on March 30, 2009, 09:45:57 AM
Quote from: "oddjob"If your hinge is bad I think  its the same body as a half ton I have an extra Russ




                                        :ha)
Text Only | Text with Attachments