Text Only | Text with Attachments

The Rodding Roundtable

Motorhead Message Central => Rodder's Roundtable => Topic started by: junkyardjeff on December 11, 2008, 09:41:06 PM

Title: Automatic trans cooler line question
Post by: junkyardjeff on December 11, 2008, 09:41:06 PM
I have a mid 70s ford C-6 that I need to know which line is the one the fluid comes out of,I am in the process of putting the front sheetmetal back on and would like to add a auxillary cooler before the grille goes in and I cant start it yet so I want to have everything hooked up right before it gets fired up.  Jeff
Title: Automatic trans cooler line question
Post by: junkyardjeff on December 11, 2008, 09:42:46 PM
I want the fluid to go through the cooler in the radiator first then go through the aux cooler.  Jeff
Title: Automatic trans cooler line question
Post by: Crosley.In.AZ on December 11, 2008, 11:20:15 PM
easy,

return line is the rear fitting.  


Pressure fitting is the front one near the pump.
Title: Automatic trans cooler line question
Post by: junkyardjeff on December 11, 2008, 11:43:30 PM
I was going to guess the front line since its close to the pump but you never know.  Jeff
Text Only | Text with Attachments