Text Only | Text with Attachments

The Rodding Roundtable

Motorhead Message Central => Rodder's Roundtable => Topic started by: reborn55 on February 06, 2008, 08:41:57 PM

Title: * dash
Post by: reborn55 on February 06, 2008, 08:41:57 PM
getting ready to order Vintage a/c--Genll super cooler.  going to put it in a 47 Chevy convertible with a * dash.  Seems like the dash is a little closer to firewall than stock dash.  anyone done this type install--if so--any problems to be encountered.  Thanks.
Title: * dash
Post by: enjenjo on February 06, 2008, 08:50:49 PM
Never done one. but I have a stock 48 here that I can measure if you need it. I know the * dash is flatter, but it may be about the same at the bottom flange of the dash, which is where it matters.
Title: * dash
Post by: reborn55 on February 06, 2008, 08:58:57 PM
That would be great.  Measured the * dash and there is approx. 12 inches at the bottom
Thought about putting a stock dash back in it, but wife likes this one
Title: * dash
Post by: phat rat on February 06, 2008, 10:06:43 PM
I have a * dash in the 41 with a Super Cooler. It's not Gen II but one from the mid 90's didn't have any fitment problem getting it behind there
Text Only | Text with Attachments