The Rodding Roundtable
Motorhead Message Central => Rodder's Roundtable => Topic started by: kb426 on August 05, 2007, 06:19:25 PM
This is a few of the things I worked on today. The pedals are positioned. The dash has been media blasted. ( it's still real ugly). I wanted you to see My minivan seat.
Looking good Bill 8)
hope to get to see it in person soon :D
Vance
That seat is a good fit. What mini-van is it out of?
Lynn, I can't take credit for the seat idea. Another Team Smart member told me about it. However, the 96-2000 2nd row seat is about 45" wide. The earlier version is 38" wide. I've got the bottom all the way to the back of the cab. That makes the back vertical. From midway up I'm going to have to remove some foam to give it some angle so I can ride in it for more than 5 minutes. Considerably less money than the aftermarket options.
Quote from: "kb426"Lynn, I can't take credit for the seat idea. Another Team Smart member told me about it. However, the 96-2000 2nd row seat is about 45" wide. The earlier version is 38" wide. I've got the bottom all the way to the back of the cab. That makes the back vertical. From midway up I'm going to have to remove some foam to give it some angle so I can ride in it for more than 5 minutes. Considerably less money than the aftermarket options.
Those Team Smart guys are the bomb :!: :!:
you need me to bring anything up from TX the 17th :?:
bringing the cpe, so it had better be little :idea:
Vance
Quote from: "kb426"Lynn, I can't take credit for the seat idea. Another Team Smart member told me about it. However, the 96-2000 2nd row seat is about 45" wide. The earlier version is 38" wide. I've got the bottom all the way to the back of the cab. That makes the back vertical. From midway up I'm going to have to remove some foam to give it some angle so I can ride in it for more than 5 minutes. Considerably less money than the aftermarket options.
If it was me im not taking credit cause i got the info from C9 if i remember right.. But hell yes ............. we is smart.....
Dave
Vance, just bring a smile. I'm knee deep in parts that had better be put on by the time you get here. Unless, I'm painting the chassis in which case there will be parts everywhere. After all, I have to get ahead of that other team smart guy while he runs around the country. :lol:
Quote from: "kb426"Vance, just bring a smile. I'm knee deep in parts that had better be put on by the time you get here. Unless, I'm painting the chassis in which case there will be parts everywhere. After all, I have to get ahead of that other team smart guy while he runs around the country. :lol:
Will do Bill :D
don't worry about 'ole Barney, he only puts in about an hour, hour and a half a day :wink: and....he is awful busy chasin' Outlaws around the country. I'm liable to have my C-cab done before he finishes his roadster :lol:
got any spare parts I can bring back :?
Vance