Text Only | Text with Attachments

The Rodding Roundtable

Motorhead Message Central => Rodder's Roundtable => Topic started by: Kctom on July 02, 2007, 01:03:17 PM

Title: MM II power rack.
Post by: Kctom on July 02, 2007, 01:03:17 PM
Need a little info on the MM II power rack. Is the top fitting the high pressure side? Trying to get the car ready for Good Guys in IOWA.
TOM
Title: Re: MM II power rack.
Post by: 47 ragtop on July 02, 2007, 10:57:56 PM
The smaller of the 2 fittings is the high pressure side and is the lower one. The upper fitting( the one closer to the input shaft) is the return side and is the larger
Title: Re: MM II power rack.
Post by: Kctom on July 03, 2007, 12:24:18 AM
Quote from: "47 ragtop"The smaller of the 2 fittings is the high pressure side and is the lower one. The upper fitting( the one closer to the input shaft) is the return side and is the larger

Had it backwards, thanks
Text Only | Text with Attachments