The Rodding Roundtable
Motorhead Message Central => Rodder's Roundtable => Topic started by: 1FATGMC on April 29, 2007, 12:04:09 PM
........ John (WZJUNK) and Larry did the following. I'll let him explain,
Sum
(http://purplesagetradingpost.com/sumner/temp-pictures/john-glass-1.jpg)
(http://purplesagetradingpost.com/sumner/temp-pictures/john-glass-2.jpg)
(http://purplesagetradingpost.com/sumner/temp-pictures/john-glass-3.jpg)
(http://purplesagetradingpost.com/sumner/temp-pictures/john-glass-4.jpg)
(http://purplesagetradingpost.com/sumner/temp-pictures/john-glass-5.jpg)
(http://purplesagetradingpost.com/sumner/temp-pictures/john-glass-6.jpg)
I didnt watch any cartoons because i really dont understand them :?: I do however understand the art of laying a little glass.. Ive done it myself..
Nice work
Dave :arrow: :wink: :arrow:
Thanks for posting Sum.
I will finishing up the mounting of the cover in the morning. I also laid up two other pieces yesterday. It was a shame to only use a small piece of the * trans cover. I could have made the whole piece out of glass but it was a little easier to do it this way. When I mount the cover and instal the boots I will take another picture.
I will mount the through the floor gas pedal next, then the brake pedal and the steering column. I had the customer set in the car a few days ago and we mocked it all up.
John
How many layers are you using?
Quote from: "kb426"How many layers are you using?
Six layers on this piece. I alternate with cloth and matt. On this job I used smaller pieces and overlapped them a lot. I was not interested in a smooth finish but more for strength and shape. It will all be covered with insulation and carpet.
John
I don't get up early enough to watch cartoons. What time are they on?
Quote from: "40 Chev Coupe"I don't get up early enough to watch cartoons. What time are they on?
Could be anytime...Normally transmitted direct to the world from southern Michigan....... :P :P :P :roll: :roll:
Glass work looks great John.... :!:
(http://purplesagetradingpost.com/sumner/temp-pictures/john-glass-7.jpg)
John just sent me this followup picture to the transmission cover he and Larry made and asked me to post it. Nice work John,
Sum