Print Page - Master Cyl cover?

Title: Master Cyl cover?
Post by: Daveyboy on October 20, 2006, 12:03:14 AM

Hi i need a master Cly cover (opening door for my 32s floor)
Who makes one i cant find any on the net.
Thanks Dave

Title: Re: Master Cyl cover?
Post by: Ed ke6bnl on October 20, 2006, 03:37:34 AM

Quote from: "Daveyboy"Hi i need a master Cly cover (opening door for my 32s floor)
Who makes one i cant find any on the net.
Thanks Dave

for my 50 f1 I plan on using a stainless steel door that is used for accessing plumbing in walls. I will need to change the size to fit the m/c better. not sure if you can buy them but my 53 chevy has a nice door on the floor for the batter access that would work nice BUT I do not think the after market sells them ED ke6bnl

Title: Master Cyl cover?
Post by: Dave on October 20, 2006, 06:48:13 AM

I think its rock valley thats where I bought all 3 of mine. Yogis and Parr should have em too.
Dave :wink:

Title: Master Cyl cover?
Post by: Ed ke6bnl on October 20, 2006, 07:16:48 AM

Quote from: "N8DC"I think its rock valley thats where I bought all 3 of mine. Yogis and Parr should have em too.
Dave :wink:

I is rong u is rite http://www.rockvalleyantiqueautoparts.com/catalog/access_doors.pdf
thanks for the information Ed ke6bnl

Title: Master Cyl cover?
Post by: C9 on October 20, 2006, 08:06:26 AM

Piece of 18 gage stainless.

Cut to size so it covers the floor opening.

Drill two holes, one at each end.

Retain cover with a couple of stainless #8 sheet metal screws.
Short ones so they don't stick out too far.

Remove one to swing the plate for access.
Loosen the other to allow swing.

Probably less than $5. and an hour of your time....

The Rodding Roundtable

Motorhead Message Central => Rodder's Roundtable => Topic started by: Daveyboy on October 20, 2006, 12:03:14 AM