The Rodding Roundtable
Motorhead Message Central => Rodder's Roundtable => Topic started by: Crosley.In.AZ on May 12, 2006, 11:23:49 PM
So , lets say you are a DIY/ hands on type person. Yer gonna rebuild your own 700 GM trany.
Look at this photo of a pair of used output shafts for a 700 tranny. I just replaced one of these shafts since one shaft was near failure ( it would break).
Which shaft is near failure? Would you have seen this?
just a pop quiz for the heck of it.
:arrow: :wink: :wink:
Quote from: "Crosley"So , lets say you are a DIY/ hands on type person. Yer gonna rebuild your own 700 GM trany.
Look at this photo of a pair of used output shafts for a 700 tranny. I just replaced one of these shafts since one shaft was near failure ( it would break).
Which shaft is near failure? Would you have seen this?
just a pop quiz for the heck of it.
:arrow: :wink: :wink:
the bottom one is near failure. looks twisted to me :shock:
if i didn't have a good one next to it to compare i prolly would have missed it tho.
i'm i right?
later jim
Quote from: "river1"Quote from: "Crosley"So , lets say you are a DIY/ hands on type person. Yer gonna rebuild your own 700 GM trany.
Look at this photo of a pair of used output shafts for a 700 tranny. I just replaced one of these shafts since one shaft was near failure ( it would break).
Which shaft is near failure? Would you have seen this?
just a pop quiz for the heck of it.
:arrow: :wink: :wink:
the bottom one is near failure. looks twisted to me :shock:
if i didn't have a good one next to it to compare i prolly would have missed it tho.
i'm i right?
later jim
I'm with you Jim, good call. How is the car coming along?
c ya, Sum
P.S. Tony how about something a little harder like which shaft has been to Hooters :P .
Hey Tony
Where are you located in Az.
My daughter is in Yuma and just opened a biz there so I'll be out there when she has her "Grand Opening"
MM64 8)
Quote from: "MrMopar64"Hey Tony
Where are you located in Az.
My daughter is in Yuma and just opened a biz there so I'll be out there when she has her "Grand Opening"
MM64 8)
oh about 180 miles north east of yuma in gilbert arizona
Is this a trick question? I have to agree with the twisted look but I fave seen oil holes at an angle (but I don't know where) that have a certain scavaging/pressuring effect due to rotation, But there is a stress wrinkle at the top of that oil hole. Ththought you didn't have rust in Arizona? There are definite traces of rust on the top shaft. There is rust on the teeth of the top gear and there is a funny stain around the oil hole to the right of the gear. Is that shaft out of the hurricane Katrina victim? GPster
Quote from: "GPster"Is this a trick question? I have to agree with the twisted look but I fave seen oil holes at an angle (but I don't know where) that have a certain scavaging/pressuring effect due to rotation, But there is a stress wrinkle at the top of that oil hole. Ththought you didn't have rust in Arizona? There are definite traces of rust on the top shaft. There is rust on the teeth of the top gear and there is a funny stain around the oil hole to the right of the gear. Is that shaft out of the hurricane Katrina victim? GPster
we buy cores from east area of the country. Usually less money than out here since cars actually last waaaay longer in a dry climate.
China is driving tranny core prices up THey buy the cores for metal scrap
Quote from: "Crosley"Quote from: "GPster"Is this a trick question? I have to agree with the twisted look but I fave seen oil holes at an angle (but I don't know where) that have a certain scavaging/pressuring effect due to rotation, But there is a stress wrinkle at the top of that oil hole. Ththought you didn't have rust in Arizona? There are definite traces of rust on the top shaft. There is rust on the teeth of the top gear and there is a funny stain around the oil hole to the right of the gear. Is that shaft out of the hurricane Katrina victim? GPster
we buy cores from east area of the country. Usually less money than out here since cars actually last waaaay longer in a dry climate.
China is driving tranny core prices up THey buy the cores for metal scrap
yeah, no kiddin'!
95 bucks a ton for car bodies up here...
this WILL be biteing us in the asss....
I stopped by a buddy's salvage yard the other day, he has a lot of old stuff. The scrap dealers have offered him $150 a ton where it sets. He said no, at least so far.
QuoteChina is driving tranny core prices up THey buy the cores for metal scrap
Is that like the Asian metal rotors Ford had a few years ago? The rotors were so soft the brake pads wore a groove in the rotor instead of vice versa!
Quote from: "docchevy"Quote from: "Crosley"China is driving tranny core prices up THey buy the cores for metal scrap
Is that like the Asian metal rotors Ford had a few years ago? The rotors were so soft the brake pads wore a groove in the rotor instead of vice versa!
uh, VW has done THAT for years....
So did Jim get the answer right :? :?: ,
Sum
Quote from: "1FATGMC"So did Jim get the answer right :? :?: ,
Sum
jim?
Quote from: "Crosley"Quote from: "1FATGMC"So did Jim get the answer right :? :?: ,
Sum
jim?
Remember???
Quote from: "Crosley"just a pop quiz for the heck of it.
Quote from: "river1"the bottom one is near failure. looks twisted to me :shock...............Am i right?
later jim
Tony I think you are loosing it :wink: . Maybe from having to work on so many 700R4's 8) .
c ya, Sum
Quote from: "1FATGMC"Quote from: "Crosley"Quote from: "1FATGMC"So did Jim get the answer right :? :?: ,
Sum
jim?
Remember???
Quote from: "Crosley"just a pop quiz for the heck of it.
Quote from: "river1"the bottom one is near failure. looks twisted to me :shock...............Am i right?
later jim
Tony I think you are loosing it :wink: . Maybe from having to work on so many 700R4's 8) .
c ya, Sum
well at his age memory IS one of many problems :twisted:
later jim
jim is the winner.
he now has one millon points
Quote from: "Crosley"jim is the winner.
he now has one millon points
Jim I think I should get at least 10% of those points as a finder's fee or something :roll: .
c ya, Sum
Quote from: "1FATGMC"Quote from: "Crosley"jim is the winner.
he now has one millon points
Jim I think I should get at least 10% of those points as a finder's fee or something :roll: .
c ya, Sum
jim found something?
10% of 10 is 1 , so times that by 1 million and jim has 2 million points now with the extra 10% thrown in.
8)