The Rodding Roundtable
Motorhead Message Central => Rodder's Roundtable => Topic started by: awsum34 on April 26, 2006, 10:02:47 AM
got a problem and cant figure it out, i installing remote door poppers, and remote widows, i have the poppers working both sides, have trouble getting the passager side door window working, (driver side works great)
i have spal remote unit, relays
i know it's not much to go on, but i need other idea's to look for.
Does the pass side work at all??
Make sure the wiring to the relay is correct....
Test the window motor with direct power from the battery
Then test the remote to make sure you have power from that channel to the relay.
Then test the relay to make sure it pulls in and passes power through
if all those tests turn out ok then I would start looking for a bad wire or connection
Good Luck
MM64 8)
thanks, i try that, i know it works with the window switch on the door.
i don't mind wiring, but relays get me every time.
If you are running 2 relays per side (1 for up and 1 for down)
85 and 86 one to ground and one to the remote wire for that channel (up)
30 one wire from the motor
87a ground
87 12 volts
The other relay would be the same except you would use the other remote wire (85 or 86) for that channel (down) and 30 would be the other wire from the motor
Hope this is understandable
MM64 8)
OK I'll ask. Why the duplication of both windows and doors being remote? It just adds wiring and possible problems.
found the problem, bad relay, hate buying new out of the box and still dosn't work, anyway, it all works
thanks for the help