Print Page - motor mount metal thickness

Title: motor mount metal thickness
Post by: river1 on March 06, 2006, 10:01:25 PM

if i was to make a mount similar to the one in the pic, what thickness metal should i use? i'll be using the stock motor mount. will 1/4 be sufficient?

thanks in advance

later jim

Title: motor mount metal thickness
Post by: enjenjo on March 06, 2006, 11:23:56 PM

More than enough. I would use 1/4 for the main part, and 3/16 for the gussets.

Title: motor mount metal thickness
Post by: Charlie Chops 1940 on March 06, 2006, 11:24:25 PM

1/4" wou;d be fine Jim, but 1/8th would probably do.

Charlie

Title: motor mount metal thickness
Post by: river1 on March 06, 2006, 11:55:01 PM

cool

i'll let you know how it comes out.

thanks jim

The Rodding Roundtable

Motorhead Message Central => Rodder's Roundtable => Topic started by: river1 on March 06, 2006, 10:01:25 PM