The Rodding Roundtable
Motorhead Message Central => Rodder's Roundtable => Topic started by: sal37 on January 18, 2006, 08:47:22 PM
I posted on the OZ E Rodders site but thought that I would try the brains trust on RRT.
I want a suede paint finish on my car (with a possibly white gloss firewall). I was thinking of using 2pack undercoat, which I think is waterproof. Does anyone have any experience with using 2pack undercoat as a final paint finish or am I better off putting "flattener" in some shiney stuff??
I want to use undercoat to minimise my costs (I want to get the thing on the street and look good but am not too worried about the final finish) as I may use a shiney (maybe) topcoat in the future.
Any comments greatly appreciated.
Steve
For the suede look on my 34 I used PPG flat black lacquer. The color was used in the 60's for stripes on mopar's. Lacquer may be hard to get now but should be able to get it mixed in other paints.
Epoxy primer blocked out on the car first, then a couple of thin coats of paint. Later the black can be sanded as a guide coat for finish paints. Car looks good as primer should.
Go to the hardware store, and look at interior colors. They are mostly flat, which makes it easy to eyeball them, and you can get color chips to take home.
Once you find a color you like, have your automotive paint store match and custom mix it for you. Then cover it with PPG Flex n Flat, and it will be flat but UV protected, unlike primer.
Hope that helps...
Here is my car in Flex n Flat:
(http://www.classicroad.com/modelA/132_3293.JPG)
2 pack undercoat doesn't offer any UV protection in most cases, because it's not designed to be exposed to the sun. So if it won't see much sun it will last several years, otherwise, it will start chalking in a year or so. PPG offers several flattened colors here in the US for use as topcoats. SEMS also has a satin black laquer available in gallons. For colors, you can use PPG K36 primer tinted with Concept colors for several Pastel shades. The tinting colors add some UV protection. There are also some UV safe flat clears that you could look into.
They have John Deere tractors in Oz, don't they? Find a dealer and get a gallon of John Deere Blitz Black. It is about $20.00/gal. US. It is a flat black enamel, and you can put hardener with it if you like. It makes touch-ups very easy and you can wax it if you want that semi-gloss look.
Some of the guys here have been playing with Dupont's Hot Hues, hot rod black. It is sold a flat, but is pretty shiney. The have been mixing it with 50% flatener and it seems be a pretty nice color, Just about the same gloss as DP90, but it is UV protected. If you don't mind painting every couple/three years, just use PPG DP90, it just grays out after a while.
Doug
Thanks for the info guys. The flat clear might be the best option but I was wondering if the clear brakes down faster than top coat or goes milky - does anyone have experience with this???
Quote from: "sal37"Thanks for the info guys. The flat clear might be the best option but I was wondering if the clear brakes down faster than top coat or goes milky - does anyone have experience with this???
most modern cars are clear coated.
adding the flattening agent does not hurt the UV protection of the clear does it??
Quote from: "Crosley"adding the flattening agent does not hurt the UV protection of the clear does it??
That is what I was hoping to find out :wink:
Steve
No it doesn't hurt it. All new cars have a clear coat on them, and have for some time.