Text Only | Text with Attachments

The Rodding Roundtable

Motorhead Message Central => Rodder's Roundtable => Topic started by: 348tripower on November 17, 2005, 09:47:37 AM

Title: 700r4 Torque converter bolts
Post by: 348tripower on November 17, 2005, 09:47:37 AM
Anybody know what size they are? I see them listed for 350 and 400 transes but none for a 700.
Don
Title: 700r4 Torque converter bolts
Post by: enjenjo on November 17, 2005, 10:22:39 AM
They are metric, grade 10.6, and I believe they are 10mm x 1.5mm x 15mm.
Title: 700r4 Torque converter bolts
Post by: 348tripower on November 17, 2005, 11:43:43 AM
You are correct! I finally found out after about an hour of searching. Thanks,
Don





Quote from: "enjenjo"They are metric, grade 10.6, and I believe they are 10mm x 1.5mm x 15mm.
Title: 700r4 Torque converter bolts
Post by: 34ford on November 17, 2005, 06:10:12 PM
So do you use flat or lock washers with the bolts??  The ones I've bought for the 350 before had flat washers with them.

thanks
bob
Title: 700r4 Torque converter bolts
Post by: Crosley.In.AZ on November 17, 2005, 07:20:15 PM
the correct bolts for the t-700 tranny do not require a washer. THe bolt head is a shoulder type bolt.

watch the depth / length of the bolt.  You do not want the bolt to hit the front of the converter shell on any lock up converter.

I would suggest some liquid retaining type stuff on the threads.
Title: 700r4 Torque converter bolts
Post by: 47convert on November 18, 2005, 12:17:32 AM
Quote from: "enjenjo"They are metric, grade 10.6, and I believe they are 10mm x 1.5mm x 15mm.

Just what I've been looking for too. Are these a dealer item? No fastener center around here will sell 3 bolts - it's buy the box or go home.
Title: 700r4 Torque converter bolts
Post by: enjenjo on November 18, 2005, 12:32:59 AM
Don't you have a fastenal store around there? I know you can get them at NAPA or other parts stores, heck the local hardware store even stocks metric bolts.
Title: 700r4 Torque converter bolts
Post by: 348tripower on November 18, 2005, 08:26:09 AM
McMaster Carr had a 5 pack and I neede some other fasteners too.





Quote from: "enjenjo"Don't you have a fastenal store around there? I know you can get them at NAPA or other parts stores, heck the local hardware store even stocks metric bolts.
Title: 700r4 Torque converter bolts
Post by: 47convert on November 18, 2005, 09:52:56 AM
Quote from: "enjenjo"Don't you have a fastenal store around there? I know you can get them at NAPA or other parts stores, heck the local hardware store even stocks metric bolts.
Wouldn't they need to be grade 8. Our hardwares stock grae 5 stuff. I'll chevk out the Napa stores.
Title: 700r4 Torque converter bolts
Post by: tom on November 18, 2005, 11:35:02 AM
mike, try windsor factory. they are usually pretty cooperative when you need just a few bolts.
Title: 700r4 Torque converter bolts
Post by: enjenjo on November 18, 2005, 04:03:37 PM
The grade marking will be 10.6. The grade is metric too. I may be spoiled, in farm country, even the hardware stores stock high grade bolts. :lol:
Title: 700r4 Torque converter bolts
Post by: 34ford on November 18, 2005, 09:28:07 PM
I stopped by the shop that built my tranny today and picked up 3 new ones for $.90 each. They have the shoulder on them and 9.8  M stamped on the top of the head. They even have some type of red lock-tite on the threads so you don't have to use any.  So I'm sure any good tranny shop should have them.

bob
Title: 700r4 Torque converter bolts
Post by: 47convert on November 20, 2005, 11:35:48 PM
Ordered some from the dealer Friday - should have them Tuesday - What service huh?
Text Only | Text with Attachments