Text Only | Text with Attachments

The Rodding Roundtable

Motorhead Message Central => Rodder's Roundtable => Topic started by: jaybee on February 26, 2022, 11:10:10 AM

Title: Belt for a small motor
Post by: jaybee on February 26, 2022, 11:10:10 AM
Does anyone know where I can go to get a belt for a small motor by length? I'm trying to run something off a sewing machine motor, but the belt it came from isn't long enough. The motor has a v pulley, but the top and bottom look more like a gear belt.
Title: Re: Belt for a small motor
Post by: kb426 on February 26, 2022, 11:23:02 AM
Do you mean a cog tooth belt or just a pulley with cogs at the bottom?
Title: Re: Belt for a small motor
Post by: jaybee on February 26, 2022, 11:34:56 AM
The one I have looks just like the tan one in the pic at the link. It has a V profile and runs on a V shaped pulley with no teeth.  https://www.sdp-si.com/products/img/belts/belts_bg.jpg
Title: Re: Belt for a small motor
Post by: enjenjo on February 26, 2022, 11:40:08 PM
McMaster Carr. They have an extensive listing of belts in about any size you can imagine. They also have pulleys for those same belts. Another place to check is Surplus Center.
Title: Re: Belt for a small motor
Post by: jaybee on March 03, 2022, 08:28:40 PM
Thanks, Frank. Sorry it took so long to get back. Work never ends right now.
Text Only | Text with Attachments