Text Only | Text with Attachments

The Rodding Roundtable

Motorhead Message Central => Rodder's Roundtable => Topic started by: enjenjo on April 16, 2012, 03:03:24 AM

Title: race car front axle
Post by: enjenjo on April 16, 2012, 03:03:24 AM
Do we have any one here who can TIG weld, and has the equipment, that would like to weld up the front axle? I can arrange to get it to you. We won't need it back until the build day in Oct sometime.
Title: race car front axle
Post by: kb426 on April 16, 2012, 12:58:42 PM
Tell me more about it.
Title: race car front axle
Post by: enjenjo on April 16, 2012, 02:43:29 PM
2" by .125" DOM with Speedway ends, tacked in place. Two 4 bar brackets, they will be tacked too. Two coil over brackets tacked in place. They all need finish welding.
Title: race car front axle
Post by: oj on April 16, 2012, 05:56:55 PM
Sure i can weld it, no problimo, if the first responder can't do it.  I have the mark williams alignment jig for them anyway.  My welding is good for a couple weeks anyway before falling apart!
Title: race car front axle
Post by: enjenjo on April 18, 2012, 09:31:59 PM
OJ, I sent you a PM.
Title: race car front axle
Post by: oj on April 19, 2012, 09:27:04 AM
Okey-dokey
Text Only | Text with Attachments