Text Only | Text with Attachments

The Rodding Roundtable

Motorhead Message Central => Rodder's Roundtable => Topic started by: Dusty on May 04, 2010, 10:08:12 PM

Title: Wiring schematic....
Post by: Dusty on May 04, 2010, 10:08:12 PM
I have the coupe back in the shop for some revisions.  I am putting a '78 to '82 chevy van tilt steering column in place of a caddy column.  I wanted to put the key and starter button back on the dash/console....well the '38 starter button was on the floor, so I am moving the start function to the dash/console.  Anyone have any idea where I might find the "pinout" for the van column?

Thanks...
Title: Wiring schematic....
Post by: enjenjo on May 04, 2010, 10:17:52 PM
white: STOP LIGHT SWITCH;
DK GRN: RT RR LAP;
YEL: LT RR LP;
PPL: SIG FLSR;
BRN: HAZ FLSR;
DK BLU: RT FT LP;
LT BLU: LT FT LP;
BLK: HORN.

Indicator light wire off the front turn sig wires.
Title: Wiring schematic....
Post by: Dusty on May 04, 2010, 10:24:17 PM
Man....That was quick...
All you gotta do is ask...
I figured I'd either get you or Wayne Petty...

Thanks
Title: Standard?
Post by: 58Apache on May 05, 2010, 03:53:54 AM
Is that a standard for most GM columns? I have an S-10 column I want to use in my 58 that is going to need to be rebuilt. Wiring I know is a mess. Where do I look for new wiring for the column?
Title: Wiring schematic....
Post by: enjenjo on May 05, 2010, 10:03:39 AM
Turn signal wiring is the same. there will be two wires not listed, the colors slip my mind right now, those are for the key in buzzer. If the plug is cut off the harness, you can splice another one on. Wiper and dimmer switch are on another plug.
Text Only | Text with Attachments