The Rodding Roundtable
Site Content => Tech Archive => Topic started by: wayne petty on September 09, 2009, 01:00:02 PM
a while back i posted the upper link... somebody else pointed out that the measurements are 5 or 6 inches off and the proper one is below...
anybody got a frame book they can take a look at.. i hate being incorrect in my info sources...
i only post this info for the measurement between the upper control arm brackets... as that is where the frame sag is measured at... the second version .. that critical measurement is not there... and the frame horns are different on the imca version...
http://www.imca.com/manage/uploaded/%5Bform-27%5Dgm_chevelle_frame_dimensions.pdf
http://www.chevellestuff.com/tech/67_frame_dimensions.htm